![European deer skull and antler table plaque. European deer skull and antler table plaque.](https://cdn11.bigcommerce.com/s-9ccmfvw5y2/images/stencil/300x300/products/162/502/ANTLR-HLDR-TBL-JMILL__49042.1618800296.jpg?c=1)
European Deer Antler Wall Plaque
RSFMade in the U.S.A.
Handmade by the Amish.
Dimensions: Stained Oak European (8.25" W x 16.25" H x 0.75" D, 2 lbs.)
Mounting the Skull:
You will need a 2.5 inch to 3 inch screw and a drill with a circumference smaller than the screw. Drill a hole into the bottom of the skull. Place the skull on the plaque and mark the spot on the wood that lines up with the hole in the skull. Drill the hole in the wood where you marked. Taking the back of the wooden plaque where the hanger is, drill the screw in the wood about 1.5 inches through the wood, but not all the way in. Line up the screw with the hole in the skull and screw in. Straighten the plaque and line it up exactly how you want it before screwing in completely. Don't screw too tight as this may crack the skull.